Want Better Pricing? Call us

800-248-7540

Free Shipping FREE SHIPPING
   Click here for Details

Blue Sky SKYSYSTEM-2.1-SYSTEM 1 x Sub12 2 x Sat6.5 3-way Monitor Speaker System

Discontinued
In StockAvailability: Out of Stock
*Special Order
SKYSYSTEM-2.1-SYSTEM | Mfr#:

Quick Overview

3-way Monitor Speaker System - 2 x Sat6.5 - 1 x Sub12 | Sky System One is the first in a line of 2.1 - integrated 3-way monitoring systems to be offered by Blue Sky International. Sky System One consists of two Blue Sky SAT 6.5 bi-amplified satellite speakers and a single 200-Watt powered SUB ...

Details

Sky System One is the first in a line of 2.1 - integrated 3-way monitoring systems to be offered by Blue Sky International. Sky System One consists of two Blue Sky SAT 6.5 bi-amplified satellite speakers and a single 200-Watt powered SUB 12 subwoofer. Employing Blue Sky's proprietary computer-optimized crossover and bass-management networks, the Sky System One delivers seamless full range audio from the subwoofer to the main monitors with smooth on and off-axis frequency response. In addition, the Sky System One is THX pm3 Approved for use in THX pm3 Certified Studios and by adding three SAT 6.5s and a Blue Sky BMC, the system is easily expandable for use in a 5.1 monitoring setup.

General Specifications - SAT 6.5

  • Input Impedance: 40k Ohms balanced
  • Common Mode Rejection Ratio: 40dB typical 60Hz
  • Voltage Sensitivity: 200mV = 90dB SPL @ 1M
  • Maximum Input Level: +24dBu balanced
  • Frequency Response: +/- 1.5dB 200 to 10kHz; +/- 3.0dB 80 to 20kHz
  • Low Frequency Cutoff: 80Hz
  • Low Frequency Rolloff: 12dB per octave
  • System Q: 0.707
  • System Crossover Frequency: 1.5kHz
  • System Crossover Slope: 4th order Linkwitz-Riley Acoustic
  • Enclosure

  • Solid 3/4" MDF construction with 1" front and rear baffle"
  • Viscoelastic energy absorbing front baffle coating
  • 1/4"x 20 inserts for attachment of OmniMount type 60 brackets (formerly known as the 100 Series).
  • Dimensions are 12" H x 8" W x 10 1/4" D (11.88" with heatsink and tweeter wave guide)
  • Weight 27lbs
  • 6 1/2" Hemispherical Woofer

  • Long excursion design with a cast aluminum frame
  • 1 1/2" aluminum voice coil with vented motor for high power handling
  • Copper shorting ring for lower distortion.
  • Ultra-Low power compression
  • Mica filled polypropylene cone and rubber surround
  • Fully video shielded
  • 1" Tweeter

  • Dual concentric diaphragm with integral wave guide
  • High power handling neodymium motor structure
  • Fully video shielded
  • SUB 1Khz primary resonance
  • Satellite Amplifier

  • Discrete symmetrical bipolar design with localized feedback
  • 100-Watts RMS into 4-Ohms for the woofer
  • 100-Watts RMS into 4-Ohms for the tweeter
  • THD + Noise less than 0.015% at rated output @1kHz
  • XLR balanced input
  • Adjustable gain control.
  • Computer optimized crossover
  • General Specifications - SUB 12

  • All subwoofer measurements are measured using the subwoofer direct input, which does not have a low pass filter.
  • Voltage Sensitivity: 90dB SPL @ 100mv @ 1M (40 to 80Hz bandwidth limited)
  • Frequency Response (anechoic): 30 to 200Hz +/-3dB
  • Typical In-Room Response: 20 to 200Hz (3000 Cubic Feet)
  • Bass Management Section

  • Input Impedance: 20k Ohms balanced
  • Common Mode Rejection Ratio: 40dB typical @60Hz
  • Maximum Input Level (all inputs): +24dBu balanced
  • Maximum Output Level: +24dBu balanced
  • Output Impedance: 200 Ohms balanced
  • Auto Mute Time Out: >15 Minutes
  • Mute Threshold (all inputs): 30mV
  • Left & Right Inputs to Sat Outputs

  • Gain (balanced in and out): 0dB
  • High-Pass Filter type: 2nd order Linkwitz-Riley
  • High-Pass Filter Cutoff: 80Hz
  • High-pass Filter Q: 0.707
  • THD + Noise: 0.002% @ 1kHz @ +4dBu
  • Left & Right Inputs to SUB Out

  • Gain: 0dB
  • Low-Pass Filter Type: 4th order Linkwitz-Riley
  • Low-Pass Cutoff: 80Hz
  • Subwoofer Direct In to Direct Output: Gain: 0dB; Low-Pass Filter: None
  • Enclosure

  • Solid 3/4" MDF construction with 1" MDF Front and Rear Baffle
  • Viscoelastic energy absorbing front baffle coating
  • Flush mounted driver
  • Isolation feet are included. Inserts for optional attachment of spike feet.
  • Dimensions are 18" H x 16" W x 20" D (22.07" with heatsink and grill)
  • Weight 62lbs.
  • 12" Woofer

  • Long excursion design with cast aluminum frame.
  • 2" voice coil with vented motor for high power handling
  • Fully video shielded
  • Subwoofer Amplifier
  • Discrete symmetrical bipolar design with localized feedback
  • 200-W RMS into 4 Ohms
  • THD + Noise less than 0.015% at rated power @100Hz
  • Adjustable gain control
  • Measurement Data (Click to view response graph)
  • Additional Information

    Subtitle 1 x Sub12 2 x Sat6.5 3-way Monitor Speaker System
    SKU SKYSYSTEM-2.1-SYSTEM
    Mfr# N/A
    Manufacturer Blue Sky
    Warranty Default 1 Year
    Special Order Special Order
    Free Shipping N/A
    Lease Amount No
    Sale Increment N/A

    Product Tags

    Use spaces to separate tags. Use single quotes (') for phrases.

    Write Your Own Review

    You're reviewing: Blue Sky SKYSYSTEM-2.1-SYSTEM 1 x Sub12 2 x Sat6.5 3-way Monitor Speaker System

    How do you rate this product? *

      1 star 2 stars 3 stars 4 stars 5 stars
    Value
    Quality
    Price

    Questions on Blue Sky SKYSYSTEM-2.1-SYSTEM 1 x Sub12 2 x Sat6.5 3-way Monitor Speaker System

    No questions asked yet

    Similar Products

    Why we're the best

    Been in Business for 20 Years 15 years in Business Authorized Dealer Authorized Dealer Church Discounts Church Non-Profit Discounts Lifetime Tech Support LifeTime Tech Support Secure Shopping SSL Secured & PCI Compliant

    Wholesale Distributor Wholesale Distributor