Nigel B Design's MB-UIM-15 is a pole-mounted solution that easily isolates & protects projectors or other sensitive equipment from vibrations generated from any external source.
Absorbing the source of Vibration is achieved using a combination of Vibration Absorbing Grommets and Specially Engineered Rubber Compound Isolating Elements. Each Mount consists of four engineered Isolation Elements and two Intermediate Plates. The Intermediate Plates are fitted with 8 Damping Grommets that absorb unwanted vibration that's often generated from HAVC Units that are usually mounted on the same Steelwork as the Projectors. This combination of Damping Grommets and Isolation Elements prevents this vibration being transferred to the Projector itself.
Each Isolation Mount must be matched to each System's Weight. It is important therefore, when ordering an Isolation Mount, to add the weight of the Projector Mount, the Projector itself and any Projector Pole that will be installed below our Isolation Mount.
Can be easily installed in many other HANGING APPLICATIONS not just Projectors. In Projector Installations, the Isolation Mount is placed JUST ABOVE the Projector between two lengths of ordinary 1-1/2" diameter Projector Pipe as shown in the illustration above. Smaller than the Projector itself, its 4" x 4" footprint will not be noticeable.
Default 1 Year
Posted by cdl on 18th Jan 2017
This has helped our projected image to be much more stable as we had issues with the false ceiling being attached to a huge air duct right where the projector needed to be. Without this device it would not be possible. It has removed most all jitter from the projected image. Which enables us to us the room. Also this solution was most likely cheaper then the other solution of running pipes and a cross brace etc. Which was quoted as $2200.
All prices are in USD.