RDE Microphones' VideoMic Pro combines broadcast quality audio with a compact and lightweight ergonomic design.
Incorporating features specific to high-end video, the VMP's noise transference has been significantly reduced using both a revised shock mounting system and a lightweight premium cable.
Rode VIDEOMIC-PRO Features: Broadcast recording quality condenser microphone Compact design (only 150mm/6" length) Ultra lightweight (only 85g/3oz) 9V battery powered, with up to 70 hours battery life (alkaline) Integrated shock mounting Integrated foam windshield 3.5mm stereo mini-jack output (dual mono) Two-step High Pass Filter (flat, 80Hz) Three-position level control (-10dB, 0, +20dB) Camera shoe mount with 3/8" thread for easy boompole mounting
Rode VIDEOMIC-PRO Specifications: Power: 9V alkaline battery (Current 7.8mA) Acoustic Principle: Line Gradient Directional Pattern: Super-Cardioid Frequency range: 40Hz-20kHz, selectable HPF @ 80Hz/12dB/octave Output impedance: 200 ohms Signal noise ratio: 74 dB SPL (A - weighted per IEC651) Equivalent noise: 20 dB SPL (A - weighted per IEC651) Maximum SPL: 134dB SPL (@ 1kHz, 1% THD into 1Kohm load) Maximum output voltage: +6.9dBu (@ 1% THD into 1Kohm) Sensitivity: -38 dB re 1 Volt/Pascal (15 mV @ 94 dB SPL) +/- 2 dB @ 1kHz Weight: 3 oz. (85 g) Dimensions: 3.74" H x 1.69" W x 6" D (95 x 43 x 150 mm)