PV3000GFCI
Utilize your vehicle's battery to efficiently power office equipment on the road or power tools at a work site. Continuously supplies up to 3000 watts of 120V AC power to 4 AC GFCI protected outlets from any 12V battery or automotive DC source. Includes a PV remote and 25 feet of cable. Super-compact, lightweight metal case design is among the smallest, most rugged inverters available at this power level. Conforms to OSHA 1926.404 (b) (1) (ii).
Key Features
Converts DC power into 3000 watts of continuous 120V AC power 15- and 20-amp outlets provide 120V AC power Includes "Battery Saver" low voltage alarm/shutdown Heavy-duty DC input terminals assure solid connection to battery. Dual connections provide high wattage to support heavy equipment loads. Operating mode switch controls inverter operation. Remote control jack provides optional remote monitoring and control (when used with FREE, included LED/switch module) Remote Control LED/Switch Module controls and monitors your inverter from virtually anywhere within your vehicle with use of included extra-long cable. Allows multiple mounting options, including behind or below a dashboard or compartment. Features daisy-chain capability Battery charge level LEDs indicate the approximate charge level (high/medium/low) of connected batteries Connected load level LEDs indicate the approximate wattage load level (high/medium/low) of connected equipment Sturdy extruded aluminum case stands up to the toughest work environments Battery conservation charge dial conserves battery power by setting the low-load level at which the inverter automatically shuts off Cooling fans provide cooler operation, lengthening inverter service life Circuit breakers guard the inverter against potentially damanging equipment overload Mounting flanges provide safe, fixed installation Grooved cooling surface provides additional surface area for more efficient cooling Grounding lug connects to vehicle ground Output
Frequency Compatibility: 60Hz Output Watts: 3000 Continuous Output Capacity: 3000 Watts Peak Output Capacity: 6000 Watts Output Nominal Voltage: 120V Output Voltage Regulation: Maintains PWM sine wave output voltage of 115VAC (+/-8VAC) Output Frequency Regulation: 60Hz (+/- 3Hz) Overload Protection: Automatic overload protection shuts down inverter system in the event of overloads. Output is protected by 2 built-in 20A circuit breakers (each controlling power to 2 outlets). Inverter and electrical system are protected via set of 6 40A automotive input fuses. Outlet quantity / type: 4 AC outlets (GFCI Protected) Input
Recommended Electrical Service: Requires 12VDC input source capable of delivering 286A for the required duration (when used at full capacity). For automotive applications, professional hardwire installation with 500A battery system fusing is recommended. Maximum Input Amps: 286A (Full continuous mode - 286A at 12VDC, no load - 1.5A at 12VDC, Shutdown / load sense mode - less than 100 microamps) Input cord length details: User supplies cabling. Minimum gauges for full load operation: 0(10' max), 00 or 2/0(13' max), Twinn 00 using 4 conductors (26ft) LED's Alarms & Switches
Alarms: Dual function alarm indicates overload conditions or low DC input voltage of 10.5V or less. Switches: 3 position rocker switch enables on/off power control, plus remote setting which enables inverter to be remotely powered on or off when used in conjuction with APSRM4 module Physical
Weight: 12.2lbs Shipping Dimensions: 4.3" x 12.5" x 14.8" Cooling Method: Fan Material of Construction: Aluminum / Sheet Metal Form Factors Supported: Mounting slots enable permanent placement of inverter on any horizontal surface (see manual for additional mounting information).
Authorized Re-Seller
