The MX430-101 is an 8x8 HDMI Matrix Switcher, supporting HDMI video signals with HDCP content protection. This switcher has 8 inputs. Any input can be simultaneously distributed to any one output, all eight outputs, or any combination of outputs with little to no signal degredation.
Control. Using standard RS-232 or Infra-Red, optical or digital, the MX430-101 can be controlled through an external source or through the unit's front panel. The MX430-101 utilizes the standard Altinex serial protocol similar to all other MultiTasker products. Front panel control includes six programmable "snap-shot" configurations.
EDID. The MX430-101 provides two methods of identifying monitor resolutions. In TV Mode, the MX430-101 connects the input with the first HDMI recognized output starting at Output 1 through Output 4. In Standard Mode, the MX430-101 pulls EDID resolutions from an internal table.
Content Protection. Fully HDCP compliant, the MX430-101 provides individual key management on each output.
Cabling. The MX430-101 regenerates each outbound signal. This is important when signals are distributed from the matrix a significant distance. Altinex recommends not exceeding 33 ft on the input or output of the MX430-101.
Altinex MX430-101 Features:
Altinex MX430-101 Specifications:
- Digital Video: (8) 19pin HDMI, female
- Power: (1) +24V, DC
- RS-232: (1) DB-9
- IR: (1) 3.5mm TRS, Mini-Jack
- HDMI Input: 33ft (10m)
- HDMI Output at 1080p/8 Bit: 50ft (15m)
- HDMI Output at 1080p/10 Bit: 33ft (10m)
- Resolutions, PC: VGA - UXGA
- Resolutions, HDTV: 480i - 1080p
- Digital Audio: Dolby TrueHD, Dolby Digital Plus, DTS HD Master Audio
- Height: 6.9in (176mm) 4RU
- Length: 19.0in (482mm)
- Width: 15.2in (385mm)
- Supply: NEMA 5-15P
- Equip.: IEC60320-C13