This ButtKicker Kit includes everything necessary to wirelessly connect and power up to 4 ButtKicker LFE's to a home theater system:
- 1 BKA-1000-4 Power Amplifier
- 1 BK-QCP Quick Connect Quick Select Package
- 1 BK-LINK Wireless Package (RF)
Designed specifically to power the ButtKicker LFE and Concert, the BKA1000-4 is an incredible value, chock full of features designed to make the installation and operation of the ButtKicker easier and more affordable. And because it is 120V-240V (switchable), it can be used around the world.
Easier: No preamplifier is required. For home theater, just use a RCA cable to go from your processor's subwoofer out to the RCA input on the ButtKicker Amplifier (use a "Y" connector if your processor has only one sub out). Then, use 12 gauge speaker wire from the amplifier to the ButtKicker. It's as simple as that - plug'n play.
More Affordable: With 1100 watts into 4 ohms and 2100 watts into 2 ohms, the BKA1000-4 is able to power one or two 4 ohm ButtKicker Shakers (when wired in parallel).
More Value - Low cutoff and variable high cutoff filters: Not only does the ButtKicker Amplifier have over 2100 watts of power, it adds low and high cutoff filters at no additional cost.
ButtKicker Link: Wirelessly send and receive audio signal from an A/V processor to the ButtKicker Power Amplifier. Can also be used with powered subwoofers.
Quick-Connect Quick-Select Package: Easily connect up to four ButtKicker LFE's to one ButtKicker Power Amplifier in a simple "plug 'n play" fasion. It also functions as an "on/off" selector switch for the ButtKickers.
BKA-1000-4 Amplifier Specifications
- 1100 Watts @ 4 ohms
- 2100 Watts @ 2 ohms - will power 2 ButtKicker LFEs wired in parallel, and 4 ButtKicker LFEs used in individual home theater seats
- 1050 Watts per ButtKicker when two units are wired in parallel
- Class D switching technology
- Variable High Cutoff: 40 to 160 Hz
- Low Cutoff: 25 Hz, switchable
- RCA and 1/4" inputs with 160mVolt and 1.25 Volt sensitivities eliminates the need for a separate pre-amplifier
- Five way binding post output
- 115V-230V, switchable, worldwide usage
- Convection cooling (no fan)
- Dimensions (W x L x H): 12" x 11" x 4.375"
- Weight: 25 lbs