Loading... Please wait...


Event Electronics 20/20BAS-EVENT Each Active Studio Monitor

Hover over image to zoom

  • Image 1
See Other Items By:

Event Electronics
21.00 LBS
Usually ships in 7-14 business days. Need it Fast? Call us
Free Shipping

 Product Description

The new 20/20bas V3 retains the character of the original EVENT 20/20 series, while incorporating massive acoustic performance advancements achieved over years of additional research. EVENT has designed and implemented an amplifier based on the topologies found in its fl agship Opal monitoring system that delivers dramatically lower distortion artifacts, high dynamics and increased output.

The 20/20bas V3 has much a lower distortion floor than many other studio monitoring systems, providing higher dynamic range which is maintained as the output level is increased. This behavior is due to the incomparable soft clipping nature of the 20/20s Class AB topology; audio playback is unfettered and remains unmasked by the distortion and inter-modulation artifacts produced by less sophisticated amplifier designs.

Event's engineering team used ideas and technologies from its flagship Opal speaker in order to achieve performance in keeping with the company design philosophy of high output, low distortion and excellent dynamics.

Event Electronics 20/20BAS-EVENT Specifications:


  • Frequency Response: 35Hz - 20kHz 2dB
  • Crossover Frequency: 2300Hz
  • 3rd Harmonic Distortion @ 90dB SPL, 1m, 500-7kHz: 0.08%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m, 200 - 20kHz: 0.2%
  • 3rd Harmonic Distortion @ 90dB SPL, 1m,Acoustic Output - SPL @ 1m, Long term (80Hz - 20kHz): 105dB
  • Acoustic Output - SPL @ 1m, Peak (80Hz - 20kHz): 108dB
  • Signal Input: XLR, RCA (balanced/unbalanced)

  • Piston Diameter: 180mm (7.1")
  • Voice Coil Configuration: High temperature single coil
  • Voice Coil Diameter: 38mm (1.5")
  • Former Material: High-strength Polyamide - Glass Fiber
  • Magnet Type: Ferrite
  • Cone Type: Mineral Filled Polypropylene
  • Magnetic Shielding: Bucking magnet and steel cap

  • Dome Diameter: 25.4mm (1")
  • Voice Coil Diameter: 25mm (0.98")
  • Magnet Type: Ferrite
  • Dome Type: Silk
  • Gap Design: Ferrofluid Cooled
  • Magnetic Shielding: Bucking Magnet.

  • Frequency Response: 20Hz - 20kHz(0.2dB)
  • Operating Band Pass: 20Hz - 2400Hz (LF)/2400Hz - 20kHz (HF)
  • Total Harmoic Distortion: 0.01% 120 Watts into 4 Ohm Load
  • Long Term Power @ 4 Ohms: 80 Watts
  • Burst Power @ 4 Ohms: 120 Watts
  • Output Topology: Class AB
  • LF Trim: Constantly variable 3dB
  • HF Trim: Constantly variable 3dB
  • Subsonic Filter: -3dB @ 30Hz
  • Driver Protection: Current Limiting
  • Temperature Protection: Thermal Cut-Off Switch
  • Indicators: Event badge 'On' mode
  • Cooling: Convection - Aluminium Heat Sink
  • Power Requirements: Voltage selector 110-120V or 220-240V, 50/60Hz, 180VA, Power via detachable 3 circuit IEC type linecord

  • Cabinet Construction: MDF
  • Low Frequency Vents: Front Port
  • Cabinet Dimensions: 260mmW x 375mmH x 300mmD (10.2"W x 14.8"H x 11.8"D)
  • Cabinet Weight: 17kg (37.48lb)
  • Shipping Dimensions: 375mmW x 495mmH x 415mmD (14.8"W x 19.5"H x 16.3"D)
  • Shipping Weight: 19kg (41.88lb)

 Warranty Information

Default 1 Year

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...


What's New

Payments Accepted


Secured by

EV SSL Signifyd | Fraud Protection and Chargeback Prevention for eCommerce

Copyright 2018 Spectrum Audio. 3301 Cline St. Houston, TX 77020. All Rights Reserved.

Click the button below to add the Event Electronics 20/20BAS-EVENT Each Active Studio Monitor to your wish list.