On Sale

JBL LSR6312SP Powered Studio Subwoofer System

JBL $2,080.00 $1,679.00 (You save $401.00)
Free Shipping
SKU: LSR6312SP
Availability: Usually ships in 1-2 business days

The LSR6312SP powered subwoofer is based on a 12" woofer with JBL's patented Differential Drive and 250 Watts of power. THX pm3 Approved. METAlliance Certified.

FEATURES

 

  • Multi-format powered subwoofer for Dolby Prologic, AC-3, DTS and other surround formats.
  • RMC Room Mode Correction provides electronic control of response peaks due to room modes. RMC Calibration Kit included.
  • 250 W continuous output power amplifier.
  • Sophisticated LCR bass management system.
  • Direct LFE input with selectable 10 dB input sensitivity.
  • Summed output allows chaining of multiple LSR6312SP for multiple subwoofer systems.
  • Differential Drive technology with dynamic braking for extended low frequency response and lowpower compression.
  • High-density baffle for low resonance and stable inertial ground.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Reinforced enclosure and convenient mounting points for mounted installation.

Specifications:

Frequency Response (-6 dB) 28 - 80 Hz
Low Frequency Extension<br>-3 dB<br>-10 dB User controls set to default
34 Hz
26 Hz
Enclosure Resonance Frequency 28 Hz
Low-To-High Crossover Frequency 80 Hz (4th order electroacoustic Linkwitz-Riley)
Distortion, 96 dB SPL/ 1 m: Low Frequency (<80 Hz) 2nd Harmonic 3rd Harmonic
Maximum Continuous SPL >112 dB SPL / 1 m (35 Hz - 80 Hz)
Maximum Peak SPL >115 dB SPL / 1 m (35 Hz - 80 Hz)
Calibrated Input Sensitivity: XLR or ", Selectable -10 dBV, +4 dBu, +8 dBu 96 dB / 1 m
Power Nonlinearity (20 Hz 200 Hz) 30 Watts: 100 Watts:
Power/Clip/Bypass Indicators Green LED normal operation
Amber LED bypass mode
Red LED Limiter activated
Low Frequency Topology Class A-B, all discrete
Sine Wave Power Rating 260 watts (<0.5% THD into rated impedance)
THD + N, Power <0.05%
AC Input Voltage 115 VAC, 60 Hz (230VAC, 50 Hz model LSR6312SP/230)
AC Input Voltage Operating Range 15%
Low Frequency Model 252F
Diameter 300 MM (12 in)
Voice Coil 50 mm (2 in) Differential Drive with dynamic braking coil
Magnet Type Neodymium, with integral heat sink
Cone Type Carbon fiber composite
Impedance 2 ohms
Left, Center, Right and Direct Inputs Neutrik Combi XLR-"
Left, Center and Right Outputs Neutrik XLR, balanced (pin 2 hot)
Low Frequency Summed Output Neutrik XLR, balanced (pin 2 hot)
Remote Bypass Connector " tip-sleeve jack
Direct Input LFE +10 dB Push-on/push-off switch
LF Output Trim 0 to -13 dB
LF Sensitivity (+4 dBu) -10 dBv, +4, +8, +12 dBu
Polarity Reverse In/Out
LF Alignment 0, -4 dB
RMC Defeat In/Out
Remote RMC Defeat Connector " tip-sleeve jack
Subwoofer Bypass Connector " tip-sleeve jack
RMC Frequency Adjust 24 Hz - 96 Hz (18 centers)
RMC Depth Adjust 0 - 14 dB (cut only)
RMC Makeup Gain 0 to +6 dB
RMC Q Adjust 1/20th to 1/2 Octave (21 steps)
Finish Smooth dark graphite
Enclosure Construction 19 mm ( in) MDF
Mounting 4 threaded mounting points conforming to industry standard square pattern 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
Baffle Material Injection molded structural ABS
Enclosure Volume (net) 50 liter (1.8 cu ft)
Net Weight 22.7 kg (50 lb)
Dimensions (WxHxD) 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)
Read more
Add To Quote

Description

The LSR6312SP powered subwoofer is based on a 12" woofer with JBL's patented Differential Drive and 250 Watts of power. THX pm3 Approved. METAlliance Certified.

FEATURES

 

  • Multi-format powered subwoofer for Dolby Prologic, AC-3, DTS and other surround formats.
  • RMC Room Mode Correction provides electronic control of response peaks due to room modes. RMC Calibration Kit included.
  • 250 W continuous output power amplifier.
  • Sophisticated LCR bass management system.
  • Direct LFE input with selectable 10 dB input sensitivity.
  • Summed output allows chaining of multiple LSR6312SP for multiple subwoofer systems.
  • Differential Drive technology with dynamic braking for extended low frequency response and lowpower compression.
  • High-density baffle for low resonance and stable inertial ground.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Reinforced enclosure and convenient mounting points for mounted installation.

Specifications:

Frequency Response (-6 dB) 28 - 80 Hz
Low Frequency Extension<br>-3 dB<br>-10 dB User controls set to default
34 Hz
26 Hz
Enclosure Resonance Frequency 28 Hz
Low-To-High Crossover Frequency 80 Hz (4th order electroacoustic Linkwitz-Riley)
Distortion, 96 dB SPL/ 1 m: Low Frequency (<80 Hz) 2nd Harmonic 3rd Harmonic
Maximum Continuous SPL >112 dB SPL / 1 m (35 Hz - 80 Hz)
Maximum Peak SPL >115 dB SPL / 1 m (35 Hz - 80 Hz)
Calibrated Input Sensitivity: XLR or ", Selectable -10 dBV, +4 dBu, +8 dBu 96 dB / 1 m
Power Nonlinearity (20 Hz 200 Hz) 30 Watts: 100 Watts:
Power/Clip/Bypass Indicators Green LED normal operation
Amber LED bypass mode
Red LED Limiter activated
Low Frequency Topology Class A-B, all discrete
Sine Wave Power Rating 260 watts (<0.5% THD into rated impedance)
THD + N, Power <0.05%
AC Input Voltage 115 VAC, 60 Hz (230VAC, 50 Hz model LSR6312SP/230)
AC Input Voltage Operating Range 15%
Low Frequency Model 252F
Diameter 300 MM (12 in)
Voice Coil 50 mm (2 in) Differential Drive with dynamic braking coil
Magnet Type Neodymium, with integral heat sink
Cone Type Carbon fiber composite
Impedance 2 ohms
Left, Center, Right and Direct Inputs Neutrik Combi XLR-"
Left, Center and Right Outputs Neutrik XLR, balanced (pin 2 hot)
Low Frequency Summed Output Neutrik XLR, balanced (pin 2 hot)
Remote Bypass Connector " tip-sleeve jack
Direct Input LFE +10 dB Push-on/push-off switch
LF Output Trim 0 to -13 dB
LF Sensitivity (+4 dBu) -10 dBv, +4, +8, +12 dBu
Polarity Reverse In/Out
LF Alignment 0, -4 dB
RMC Defeat In/Out
Remote RMC Defeat Connector " tip-sleeve jack
Subwoofer Bypass Connector " tip-sleeve jack
RMC Frequency Adjust 24 Hz - 96 Hz (18 centers)
RMC Depth Adjust 0 - 14 dB (cut only)
RMC Makeup Gain 0 to +6 dB
RMC Q Adjust 1/20th to 1/2 Octave (21 steps)
Finish Smooth dark graphite
Enclosure Construction 19 mm ( in) MDF
Mounting 4 threaded mounting points conforming to industry standard square pattern 127 x 70 mm (5 x 2.75 in) center to center. M6 metric threads.
Baffle Material Injection molded structural ABS
Enclosure Volume (net) 50 liter (1.8 cu ft)
Net Weight 22.7 kg (50 lb)
Dimensions (WxHxD) 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)

Reviews (0)

Be the first to write a review

Additional info

UPC: 050036902762
Weight: 65.00 LBS
Width: 19.00
Height: 16.00
Depth: 27.00
Shipping: Free Shipping
Warranty: Default 1 Year