On Sale

JBL LSR6332L Linear Spatial Reference Studio Monitor System (Left Side)

JBL $1,910.00 $1,559.00 (You save $351.00)
Free Shipping
SKU: LSR6332L
Availability: Usually ships in 1-2 business days

Linear Spatial Reference Studio Monitor System

The LSR6332 incorporates a 12" Differential Drive dual coil woofer, 5" Kevlar midrange speaker and 1" titanium composite tweeter. THX pm3 Approved.

FEATURES

  • Advanced Linear Spatial Reference design ensures flatter response at the mix position.
  • Differential Drive technology with dynamic braking for extended low frequency response and low power compression.
  • Neodymium midrange with 2" voice coil and Kevlar cone material for extended frequency responseand low distortion.
  • Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
  • High-Density baffle for low enclosure resonance and stable inertial ground.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Magnetically shielded for use near video monitors.
  • Reinforced enclosure and convenient mounting points allow mounted installation.
  • Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
  • Available as mirror image left and right models.

Specifications:

Input Impedance (Nominal) 4 ohm
Anechoic Sensitivity 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
Frequency Response (60 Hz 22 kHz) +1. -1.5 dB
Low Frequency Extension -3 dB: 54 Hz
-10 dB: 35 Hz
Enclosure Resonance Frequency 33 Hz
Long Term Maximum Power (IEC265-8) 200 W continuous average; 800 W peak
Recommended Amplifier Power 150 W - 1000 W (rating into 4-ohm load)
High Frequency Control (2.5 to 20 kHz) 0 dB, -1 dB
Distortion, 96 dB SPL, 1 m : Low Frequency (below 120 Hz) 2nd Harmonic: 3rd Harmonic:
Distortion, 96 dB SPL, 1 m : Mid and High Frequency (120 Hz to 20 kHz) 2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Low Frequency (below 120 Hz) 2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Mid and High Frequency (80 Hz to 20 kHz) 2nd Harmonic: 3rd Harmonic:
Power Nonlinearity (20 Hz to 20 kHz) 30 Watts: 100 Watts:
Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley 250 Hz
Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley 2.2 kHz
Low Frequency Model 252G
Diameter 300 mm (12 in)
Voice Coil 50 mm (2 in) Differential Drive with dynamic braking coil
Magnet Type Neodymium
Cone Type Carbon Fiber Composite
Impedance 4 ohms
Mid Frequency Model C500G
Diameter 125 mm (5 in)
Voice Coil 50 mm (2 in) aluminum edge wound
Cone Type Kevlar composite
High Frequency Model 053TiS
Diameter 25 mm (1 in) diaphragm
Voice Coil 25 mm (1 in)
Magnet Type Ceramic 5
Diaphragm Type Damped titanium composite
Other Features Elliptical oblate spheroidal waveguide
Finish Smooth dark graphite
Enclosure Volume (Net) 50 liter (1.8 cu ft)
Input Connectors 5-way binding posts
Input Features Bi-wirable
Mounting 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.
Baffle Construction Injection molded structural ABS
Enclosure Construction 19 mm (3/4 in) MDF
Net Weight 20.4 kg (45 lb)
Dimensions (WxHxD) 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)
Read more
Add To Quote

Description

Linear Spatial Reference Studio Monitor System

The LSR6332 incorporates a 12" Differential Drive dual coil woofer, 5" Kevlar midrange speaker and 1" titanium composite tweeter. THX pm3 Approved.

FEATURES

  • Advanced Linear Spatial Reference design ensures flatter response at the mix position.
  • Differential Drive technology with dynamic braking for extended low frequency response and low power compression.
  • Neodymium midrange with 2" voice coil and Kevlar cone material for extended frequency responseand low distortion.
  • Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
  • High-Density baffle for low enclosure resonance and stable inertial ground.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Magnetically shielded for use near video monitors.
  • Reinforced enclosure and convenient mounting points allow mounted installation.
  • Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
  • Available as mirror image left and right models.

Specifications:

Input Impedance (Nominal) 4 ohm
Anechoic Sensitivity 93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
Frequency Response (60 Hz 22 kHz) +1. -1.5 dB
Low Frequency Extension -3 dB: 54 Hz
-10 dB: 35 Hz
Enclosure Resonance Frequency 33 Hz
Long Term Maximum Power (IEC265-8) 200 W continuous average; 800 W peak
Recommended Amplifier Power 150 W - 1000 W (rating into 4-ohm load)
High Frequency Control (2.5 to 20 kHz) 0 dB, -1 dB
Distortion, 96 dB SPL, 1 m : Low Frequency (below 120 Hz) 2nd Harmonic: 3rd Harmonic:
Distortion, 96 dB SPL, 1 m : Mid and High Frequency (120 Hz to 20 kHz) 2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Low Frequency (below 120 Hz) 2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Mid and High Frequency (80 Hz to 20 kHz) 2nd Harmonic: 3rd Harmonic:
Power Nonlinearity (20 Hz to 20 kHz) 30 Watts: 100 Watts:
Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley 250 Hz
Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley 2.2 kHz
Low Frequency Model 252G
Diameter 300 mm (12 in)
Voice Coil 50 mm (2 in) Differential Drive with dynamic braking coil
Magnet Type Neodymium
Cone Type Carbon Fiber Composite
Impedance 4 ohms
Mid Frequency Model C500G
Diameter 125 mm (5 in)
Voice Coil 50 mm (2 in) aluminum edge wound
Cone Type Kevlar composite
High Frequency Model 053TiS
Diameter 25 mm (1 in) diaphragm
Voice Coil 25 mm (1 in)
Magnet Type Ceramic 5
Diaphragm Type Damped titanium composite
Other Features Elliptical oblate spheroidal waveguide
Finish Smooth dark graphite
Enclosure Volume (Net) 50 liter (1.8 cu ft)
Input Connectors 5-way binding posts
Input Features Bi-wirable
Mounting 4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.
Baffle Construction Injection molded structural ABS
Enclosure Construction 19 mm (3/4 in) MDF
Net Weight 20.4 kg (45 lb)
Dimensions (WxHxD) 63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)

Reviews (0)

Be the first to write a review

Additional info

UPC: 050036902854
Weight: 56.20 LBS
Width: 16.00
Height: 19.00
Depth: 27.00
Shipping: Free Shipping