Loading... Please wait...
  • 800-248-7540
  • My Account 

Categories

JBL PRX725

Hover over image to zoom

  • Image 1
  • Image 2
  • Image 3
  • Image 4
  • Image 5
$1,299.00
SKU:
PRX725
See Other Items By:

JBL
Weight:
82.00 LBS
Availability:
Usually ships in 7-14 business days
Shipping:
Free Shipping
Request Quote

 Product Description

The PRX725 is the next step in the highly successful PRX Series and introduces the first use of JBLs patented Differential Drive Technology with ferrite drivers. Differential Drive technology incorporates lower mass in the ferrite magnet for reduced weight while maximizing power amp efficiency for greater heat dissipation and increased power handling. Powering the PRX725 is a 1500 Watt high performance, exceptionally low distortion biamplification system engineered to deliver clean power with maximum headroom to efficiently deliver smooth high frequencies and rich, deep bass response even at very high sound power levels. Compact, ultra-lightweight, the PRX725 uses JBLs tour tested technology throughout so you can trust it to deliver a lifetime of reliable performance.

NOTE: These speakers are intended for suspension, floor standing or stacking and DO NOT have the ability to be pole mounted.

High Performance Drivers
37.5mm (1.5 in) Annular Polymer Diaphragm, Neodymium Magnet Compression Driver Resulting in Crystal Clear Highs and Sonic Accuracy. Wide coverage angles are achieved without compromise and harmonic distortion is minimized for maximum driver SPL without harshness.

Amplification
Highly efficient Class-D amplification drives Maximum Sound Pressure Levels are the best indication of the performance of a powered speaker and all PRX700 Series excel in this critical specification. JBLs ability to maximize the speaker and amplifier performance guarantees ample power, accurate dynamics and sonic purity.

Low Frequency
Tour tested Differential Drive technology delivers extended frequency response, high power output and low distortion in a dramatically lighter package. With the ferrite magnet positioned inside the dual-coil/dual-gap voice coil, heavy steel pole pieces are eliminated. The heat sink is the chassis itself, further lowering system weight while ensuring consistent, reliable performance.

Road Tough Construction
Built from a combination of 25 mm (on the top and bottom for added rigidity) and 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. JBLs tour proven DuraFlex finish, grilles from dent-resistant 16 gauge steel, and light-weight glass-filled nylon handles ensure strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each. A seriously rugged package that will withstand the brutality of constant road use.

Coverage
System coverage is 90 horizontal and 50 vertical with excellent coverage throughout the systems bandwidth. The sound is smooth and consistent without hotspots so control is optimized.

Configurations
The PRX700 Series is a platform technology with a range of models that integrate seamlessly for multiple system options that excel in challenging audio environments and loud volumes. The PRX725 has enough low frequency content for most applications and is scalable with PRX Series subs for high volume sound reinforcement.

  • Single speaker on a stand for public address
  • Full-range stereo set up with two top cabinets and asub-woofer for live performance or DJ
  • Multiple cabinets for a scalable, highly professionalsound reinforcement system
  • Suspend any of the top cabinets for use in commercial installations orHouses of Worship
  • Input Panel
    An integrated limiter circuit on the inputs guarantees signal integrity. System performance is optimized through the use of sophisticated Digital Signal Processing for EQ, crossover, amplifier control, and protection.

  • DSP Input limiter circuit, crossover, dynamiclimiting, component optimization, selectable system EQ
  • XLR-1/4" combination mic/instrument inputs, RCAinputs, and XLR loop-through
  • Easy to use mixing via selection switches on both the input andloop-thru
  • JBL PRX725 Specifications:

  • Power Rating: 1500 W
  • Frequency Range (-10 dB)
  • Normal: 42 Hz 18.5 kHz
  • Boost: 40 Hz 18.5 kHz
  • Frequency Response (3 dB)
  • Normal: 49 Hz 17 kHz
  • Boost: 46 Hz 17 kHz
  • Coverage Pattern: 90 x 50 nominal
  • Directivity Index (DI):10.4 dB
  • Directivity Factor (Q):11
  • Crossover Frequency:2.4 kHz
  • Maximum SPL: Normal: 139 dB
  • Boost: 139 dB
  • Dynamic Control (Input): dbx Type IV limiter circuit
  • Input Impedance: 20K Ohms (balanced), 10K Ohms(unbalanced)
  • LF Driver: 2 x JBL 275 (15 in) woofer
  • HF Driver: 1 x JBL 2408H-2 37.5 mm (1.5 in) annularpolymer diaphragm, neodymium compression driver
  • Enclosure: Trapezoidal, 18 mm, plywood
  • Suspension / Mounting: 8 x M10 Suspension Points, 1 xM10 pull back point
  • Transport: 2x integrated handle with injection moldedbacking cup
  • Finish: Obsidian DuraFlex finish
  • Grille: Powder coated, Obsidian, 16 gauge perforatedsteel with acoustical transparent black cloth backing.
  • Input Connectors: 2 x Balanced XLR / 1/4 inch input, 2 xunbalanced RCA input
  • Output Connectors: 1 male XLR balanced output
  • Dimensions: 42.14"(H) x 17.52"(W) x 21.18"(D)
  • Net Weight: 82 lb
  •  Warranty Information

    Default 1 Year

     Find Similar Products by Category

     Product Reviews

    This product hasn't received any reviews yet. Be the first to review this product!

    You Recently Viewed...

     

    What's New

    Payments Accepted

    newsletter

    Secured by

    EV SSL Signifyd | Fraud Protection and Chargeback Prevention for eCommerce

    Copyright 2017 Spectrum Audio. 3301 Cline St. Houston, TX 77020. All Rights Reserved.
    Sitemap

    Click the button below to add the JBL PRX725 to your wish list.