Loading... Please wait...

Categories

LSR6332 (Right Side)

Hover over image to zoom

  • LSR6332 (Right Side) picture
RRP: $1,910.00
$1,559.00 (You save $351.00)
SKU:
LSR6332R
See Other Items By:

JBL
Weight:
56.20 LBS
Shipping:
Calculated at checkout
Request Quote

 Product Description

Linear Spatial Reference Studio Monitor System

The LSR6332 incorporates a 12" Differential Drive dual coil woofer, 5" Kevlar midrange speaker and 1" titanium composite tweeter. THX pm3 Approved.

FEATURES

  • Advanced Linear Spatial Reference design ensures flatter response at the mix position.
  • Differential Drive technology with dynamic braking for extended low frequency response and low power compression.
  • Neodymium midrange with 2" voice coil and Kevlar cone material for extended frequency responseand low distortion.
  • Titanium composite high frequency transducer with elliptical oblate spheroidal waveguide and damped polepiece.
  • High-Density baffle for low enclosure resonance and stable inertial ground.
  • Linear Dynamics Aperture port design eliminates port turbulence and reduces port compression.
  • Magnetically shielded for use near video monitors.
  • Reinforced enclosure and convenient mounting points allow mounted installation.
  • Midrange/high frequency sub-baffle may be rotated by user for horizontal or vertical orientation.
  • Available as mirror image left and right models.

Specifications:

Input Impedance (Nominal)4 ohm
Anechoic Sensitivity93 dB/2.83 V/1 m (90 dB/ 1 W/ 1 m)
Frequency Response (60 Hz 22 kHz)+1. -1.5 dB
Low Frequency Extension-3 dB: 54 Hz
-10 dB: 35 Hz
Enclosure Resonance Frequency33 Hz
Long Term Maximum Power (IEC265-8)200 W continuous average; 800 W peak
Recommended Amplifier Power150 W - 1000 W (rating into 4-ohm load)
High Frequency Control (2.5 to 20 kHz)0 dB, -1 dB
Distortion, 96 dB SPL, 1 m : Low Frequency (below 120 Hz)2nd Harmonic: 3rd Harmonic:
Distortion, 96 dB SPL, 1 m : Mid and High Frequency (120 Hz to 20 kHz)2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Low Frequency (below 120 Hz)2nd Harmonic: 3rd Harmonic:
Distortion, 102 dB SPL, 1 m : Mid and High Frequency (80 Hz to 20 kHz)2nd Harmonic: 3rd Harmonic:
Power Nonlinearity (20 Hz to 20 kHz)30 Watts: 100 Watts:
Low-Mid Frequency Crossover: 4th Order Acoustic Linkwitz-Riley250 Hz
Mid-High Frequency Crossover: 4th Order Acoustic Linkwitz-Riley2.2 kHz
Low Frequency Model252G
Diameter300 mm (12 in)
Voice Coil50 mm (2 in) Differential Drive with dynamic braking coil
Magnet TypeNeodymium
Cone TypeCarbon Fiber Composite
Impedance4 ohms
Mid Frequency ModelC500G
Diameter125 mm (5 in)
Voice Coil50 mm (2 in) aluminum edge wound
Cone TypeKevlar composite
High Frequency Model053TiS
Diameter25 mm (1 in) diaphragm
Voice Coil25 mm (1 in)
Magnet TypeCeramic 5
Diaphragm TypeDamped titanium composite
Other FeaturesElliptical oblate spheroidal waveguide
FinishSmooth dark graphite
Enclosure Volume (Net)50 liter (1.8 cu ft)
Input Connectors5-way binding posts
Input FeaturesBi-wirable
Mounting4 threaded mounting points conforming to industry standard square pattern, 127 x 70 mm (5 x 2.75 in) center to center. M6 metric thread.
Baffle ConstructionInjection molded structural ABS
Enclosure Construction19 mm (3/4 in) MDF
Net Weight20.4 kg (45 lb)
Dimensions (WxHxD)63.5 x 39.4 x 29.2 cm (25.0 x 15.5 x 11.5 in)

 Find Similar Products by Category

 Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!

You Recently Viewed...

 

What's New

Payments Accepted

newsletter

Secured by

EV SSL Signifyd | Fraud Protection and Chargeback Prevention for eCommerce

Copyright 2018 Spectrum Audio. 3301 Cline St. Houston, TX 77020. All Rights Reserved.
Sitemap

Click the button below to add the LSR6332 (Right Side) to your wish list.