Marshall Electronics VS-102-HDI HDMI Over IP Video Server

Marshall Electronics VS-102-HDI HDMI Over IP Video Server

(No reviews yet) Write a Review
Now $976.65
Was $1,149.00
Usually ships in 1-2 business days
10.00 LBS
Free Shipping

The Marshall VS-102-HDI is a High Definition Video Server that allows real-time transmission of HDMI or NTSC/PAL composite video signal along with bi-directional AAC encoded high definition stereo audio over standard IP networks and the internet. The Marshall VS-102-HDI incorporates advanced H.264 and MJPEG compression technology. This allows 50% more compression capacity over an existing IP Network, while providing optimal video transmission quality even in networks with limited bandwidth.

The VS-102-HDI may be configured to operate as a Point-to-Point talent monitoring system. For example, the unit can operate as an encoder to compress and transmit A/V data over a LAN to another VS-102-HDI located in a Green Room or other location. The other unit can act as a decoder which receives the compressed data through the LAN and restores the data to its' original high definition state. Additionally, other computers or VS-102-HDI decoders connected to the same network can monitor both the audio and video in multiple locations throughout a venue such as dressing rooms, stage manager, or box office at the same time. When properly configured, the VS-102-HDI may be simultaneously monitored through the internet.

Marshall Electronics VS-102-HDI Features:

  • High Quality AV Encoder / Decoder (Selectable)
  • Full HD resolution 1080p Encoding / Decoding
  • Up to 30fps @ 1920 x 1080 streaming
  • H.264/H.264 & H.264/MJPEG Dual Streaming
  • Two-Way Audio Communication
  • Mono Codec G.711 for Security applications
  • Stereo Codec AAC for Broadcast applications
  • HDMI Video Input / Output
  • Composite Video Input / Output
  • Audio Input / Output
  • Instant Recording to an optional USB drive (USB 2.0)
  • Supports DDNS (Dynamic Domain Name Server)
  • Built-in PoE (Power Over Ethernet: 802af)
  • RS-232 control built-in
  • RS-422/485 control built-in
  • 2 Sensor inputs
  • 2 Alarm outputs
  • Watchdog for system recovery
  • Integrated Video Motion Detection
  • Transmission of Video Data through FTP server
  • Wide Range of Video Bit Rate Control (32kbps ~ 10Mbps)
  • PSIA and ONVIF compliant
  • Marshall Electronics VS-102-HDI Specifications:

  • System Mode: Encoder, Decoder
  • Network: Network Interface Ethernet 10 / 100Base-T (RJ-45)
  • Network Protocol: TCP/IP, UDP, Multicast, DHCP, SMTP, HTTP, SNMP, RTP, RTSP
  • Dimensions: 134 mm W x 125 mm D x 35 mm
  • Weight: 504g
  • Power Source: DC 12V/0.8A, PoE(Power over Ethernet): 802.3af
  • Power Consumption: Max 9.6W
  • Operating Temp.: -10 C ~ 50C / 14F ~ 122F
  • Video

  • Standards: Main Stream: H.264, Secondary Stream : H.264/MJPEG
  • Data Rate: 32Kbps ~ 8Mbps
  • Resolution: 1920x1080/60i ~ 352x240/30fps, 18 resolution step
  • Frame Rate Range: 1 ~ 30fps
  • Input 1: 1 x HDMI type-A, HDMI RX
  • Input 2: 1 x BNC: Composite (Default) or HD-SDI (Option)
  • Output 1: 1 x HDMI type-A, HDMI TX
  • Output 2: 1 x BNC: Composite (Default) or HD-SDI (Option)
  • Motion Detection: Sensitivity Adjustment
  • Audio

  • Standards: G.711, AAC
  • Sample Rate: G.711: 8KHz / AAC: 32KHz
  • Data Rate: G.711: 64Kbps, AAC: 64Kbps, 128Kbps, 196Kbps
  • Input: 1 x Line-In (Mini-Stereo)
  • Output: 1 x Line-Out (Mini-Stereo)
  • Serial Port 1: 1 x RS-232 (Terminal Block)
  • Port 2: 1 x RS-422/485 (Terminal Block)
  • Data Rate: 2,400bps ~ 115,200bps
  • Sensor/Alarm/etc.

  • Sensor Input: 2 x NO Contact (Terminal Block)
  • Alarm Output: 2 x NO Contact (Terminal Block)
  • Beep: 1 x Buzzer 88dB Min
  • Reset Button: 1 x Factory Reset Button
  • User Interface

  • System Status: 4 x LED
  • Storage

  • Recording/Backup: 1 x USB 2.0 Port
  • Software

  • True CMS/NVR: Live Monitoring, Recording, Search & Playback, Backup
Default 1 Year

Customers Also Viewed